Rocktrix 2 Inch Wheel Spacers (4X4 Bolt Pattern, 68.5Mm Bore, 12X.1.25 Studs, Cone Seat Nuts) Compatible With Yamaha Golf Carts

[ Specifications ] Quantity: Two (2) Thickness: 2.0” (50Mm) Bolt Pattern: 4X4” Or 4X101.6 Centerbore: 68.5Mm Stud/Nut Thread Pitch: 12X1.25 Material: T6 Aerospace Grade Aluminum [ Fitments ] Compatible With Yamaha Golf Carts #1. Make Sure Your Bolt Pattern Is 4X4” Or 4X101.6 #2. Make Sure That Your Vehicle’S Hub Is No Larger Than 68.5Mm #3. Make Sure That Your Vehicle Uses 12X1.25 Studs / Lug Nuts Warning: Read Before Purchase/Installation – Do Not Install If Factory Wheel Studs And/Or Lug Nuts Make Contact With The Back Of Your Wheels. This Could Result In The Wheel/Tire Falling Off The Vehicle While Driving. – Check And Re-Torque All Nuts Within 10-20 Miles Of Installation. Failure To Re-Torque Nuts Could Cause A Loss Of Wheel And Result In Serious Accident, Injury Or Death. – Tools: A Torque Wrench Is Required For Installation. Do Not Use Air Tools Or Impact Wrenches. – Bolt Pattern: Vehicle Must Have 4X4” Or 4X101.6 Bolt Pattern. Be Aware That Some Have Different Bolt Pattern For Front And Rear. – Stud Length: If Your Vehicle’S Wheel Studs Are Longer Than 2.0” (50Mm), The Back Of Your Wheels Needs Pockets To Accommodate The Stud/Lug Nuts. – Fitment: Use The Fitment List Above. If Your Vehicle Does Not Appear On The List, Please See The ‘Questions And Answers’ Section Below.